| Ezefil | |||||||||||||||||||||
|
Small cracks should be opened and cleaned of any dirt and loose particles. A base adhesion coat of Wallgard 10 is applied on all sides of the cracks and allowed to dry for 15 minutes. Protecto-Ezefil 400 and 500 are mixed together in the ratio of 3:2 by weight. For horizontal cracks and joints this mixture is poured directly into the cracks. For vertical cracks, up to two parts of white cement should be mixed thoroughly with 1 part of Protecto-Ezefil 400 and 500 mixture and the resulting mixture is then used to fill the cracks by means of a spatula or putty knife. A coat of Ezecoat 500 & 600 is applied over the Protecto-Ezefil to make it resistant to U.V. rays.
|
|||||||||||||||||||||
|
|||||||||||||||||||||